Bias Roller Replacement - Ricoh FT556 Service Manual

31 March '87

3. BIAS ROLLER REPLACEMENT

Remove the bottle joint seal [A] and the to-
1.
ner collection coil cover [B] (1 screw).
2. Remove the bushing [C] of the cleaning
bias roller (1 E-ring).
3. Remove the cleaning unit drive gear [D] (1
Allen screw).
4. Remove the idle gear [E] (1 E-ring)
5. Remove the pressure arm [F] (1 screw and
1 spring).
6. Remove the cam gear [G] (1 E-ring).
7. Remove the spring plate [H] (1 screw).
8. Remove the cleaning bias roller gear [I]
(1 E-ring).
9. Remove the bias roller bracket [J] and pull
out the bias roller [K] from the rear.
3-14