By-pass
4.14 BY-PASS
4.14.1 BY-PASS PAPER SIZE SENSOR
1.
Open the by-pass tray [A].
2.
Move the side fences to the center.
3.
By-pass tray cover [B] (
4.
By-pass paper size sensor [C] (
When reinstalling the by-pass paper size sensor
1.
Adjust the projection [E] of the left side fence bar (it must be centered).
2.
Install the by-pass paper size sensor so that the hole [D] in this sensor faces the
projection [E] of the left side fence bar.
3.
Reassemble the copier.
4.
Plug in and turn on the main power switch.
D009/D011/D012/D013/D091/D092
x 4)
x 1)
4-78
SM