Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Changing the
Network Connection
Methods
The printer can connect to a wired LAN or a wireless
LAN. Furthermore, it also supports Wi-Fi Direct
(Simple AP) which allows a smart device or other
device to directly connect wirelessly with the printer
even when there is no wired LAN or wireless LAN
environment.
The printer cannot connect to a wired LAN and
wireless LAN at the same time. A Wi-Fi Direct
connection is possible regardless of whether or not the
printer is connected to a network.
This section describes the procedures to use to switch
the connection method.
Note:
See the Administrator's Guide (online manual) for
details on the network settings.
Switching to Wired LAN
A
Press
on the Home screen.
Note:
The shape and color of the icon differ depending
on the connection status.
"Screen View" on page 15
U
B
Press Description.
C
Press Wired LAN Connection Method.
D
The process to disable the wireless LAN
connection with the access point starts. Wait
until the The Wi-Fi connection is disabled.
message is displayed.
Changing the Network Connection Methods
36
E
Connect your router and the printer with a
LAN cable.
See the following for the location of the
printer's LAN port.
"Back" on page 13
U
Switching to Wireless
LAN
The SSID (network name) and password of the access
point to which the printer is to be connected are
required. Confirm them in advance. The printer can
be connected to a wireless LAN while the LAN cable is
still connected.
Note:
If your access point supports WPS (Wi-Fi Protected
Setup), the printer can be connected using Push Button
Setup(WPS) or PIN Code Setup(WPS) without using
an SSID and password.
A
Press
on the Home screen.
Note:
The shape and color of the icon differ depending
on the connection status.
"Screen View" on page 15
U
B
Press Router.
C
Press Start Setup.
Details of the wired LAN connection status are
displayed.
D
Press Change to Wi-Fi connection., check the
displayed message, and then press Yes.
E
Press Wi-Fi Setup Wizard.
F
Select the desired SSID.
If the desired SSID is not displayed, press
Search Again to update the list. If it is still not
displayed, press Enter Manually and directly
enter the SSID.
Advertisement
Table of Contents
