Paper End; Paper End Detection In Feed (Media Roll); Paper End Detection In Print Motion (Media Roll) - SATO CW408 Operator's Manual

Preliminary
Section 8: Appendix

8.5 PAPER END

8.5.1 Paper End Detection in Feed (Media Roll)

The Paper end sensor detects "No media" state and notifies paper end error after feeding 15 mm (0.6").

8.5.2 Paper End Detection in Print Motion (Media Roll)

[ When the print content falls within the area from the head position to 15 mm (0.6") less than the paper end
sensor (49.9 mm, 1.9") ]
(1)
The printer behavior when paper end is detected is as follows:
• After completing the print of media (1), "Paper end error" will occur.
• After releasing the error, media (1) will not be printed again.
Page 8-8
Head position
Media feed direction
Head position
(2)
Media feed direction
49.9 mm (1.9")
(1)
49.9 mm (1.9")
(1)
When the print content
falls within this area
Paper end sensor
15 mm
(0.6")
(2)
Paper end sensor
15 mm
(0.6")
(2)
CW408 Operator Manual