SATO CW408 Operator's Manual page 13

Preliminary
1.2 PARTS IDENTIFICATION (cont'd)
Internal View with Top Cover Open
Print head
17
This component is used to print on the media.
Perform maintenance at regular intervals.
Platen roller
18
This roller feeds the media. Perform
maintenance at regular intervals.
CW408 Operator Manual
17
18
19
20
Optional device compartment
19
Used to install optional cutter or dispenser unit.
Media guide and I-mark/ Gap sensor
20
A guide for the media to feed properly.
Detects the I-mark of the media or gap
between labels.
Section 1: Introduction
Page 1-5