Cancel Print Job Mode - SATO CW408 Operator's Manual

Preliminary

3.5 CANCEL PRINT JOB MODE

1. When the printer is in OFFLINE mode or PAUSE mode, press the LINE and FEED buttons simultaneously
to set the printer to CANCEL PRINT JOB mode. The menu for canceling the print job then appears.
2. Press the LINE button to select YES or NO. The highlight on display indicates the selected option. The
default setting is NO.
If the printer has a print job in memory, selecting YES will cause the job to be cleared.
Notes:
• Be sure you want to cancel the print job before selecting YES as the job cannot be recovered and will
have to be re-transmitted to the printer.
• Press the LINE and FEED buttons simultaneously again to exit the CANCEL PRINT JOB mode without
clearing the print data.
3. Press the FEED button to activate the selection.
If you have selected YES, the printer cleared all the print jobs from the memory. The display shows the
message, CANCEL PRINT JOB COMPLETED. The printer beeps three times, and then returns to
OFFLINE mode.
CW408 Operator Manual
PAUSE
000005
LINE + FEED button
(With/ without print data)
LINE + FEED button
PAUSE
CANCEL PRINT JOB
YES NO
Press LINE to select "YES"
+ FEED button
PAUSE
CANCEL PRINT JOB
COMPLETED
3 beeps
OFFLINE
000000
Section 3: Operation and Configuration
Press LINE to select
"NO" + FEED button
Page 3-11