Optional Accessories Specifications - SATO CW408 Operator's Manual

Preliminary

6.2 OPTIONAL ACCESSORIES SPECIFICATIONS

CUTTER SPECIFICATIONS
Media Type
Media Size
Thickness
Dimensions
Weight
Durability
Cut Position Adjustment
Mechanism
Self Diagnosis Function
DISPENSER SPECIFICATIONS
Media Type
Media Size
Thickness
Dimensions
Weight
Durability
Detection Sensor
Dispensed Position Adjustment
CW408 Operator Manual
Label, tag
1) Avoid to cut on the label area (glued area)
2) Perforation and leading part of media are forbidden areas for cutting. Cut rear
area of perforation.
Width including liner: 28 to 118 mm (1.1" to 4.6")
Pitch including liner: 28 to 400 mm (1.1" to 15.7")
W 178 X D134 X H 146 mm (with printer)
Adjustment is available with the cut position in Adjustment mode by using OLED and
Label only
1) Availability and operating condition are constrained depending on the media type,
glue type and label size.
2) Peel-end treatment is fundamental for the dispenser. Media that has no peel-end
treatment should be evaluated in each case.
3) You cannot use liner with perforation and/or slit for dispenser.
4) You can use strong glue type and weak glue type but not the type in between for
dispenser.
Width including liner: 28 to 118 mm (1.1" to 4.6")
Pitch including liner: 28 to 103 mm (1.1" to 4.1")
W 178 X D 122 X H 146 mm (with printer)
Dispenser sensor (Transmissive type)
Adjustment is available with the offset position in Adjustment mode by using OLED
and buttons on the operator panel.
Width: 25 to 115 mm (1.0" to 4.5")
Pitch: 25 to 397 mm (1.0" to 15.6")
0.08 to 0.12 mm (0.003" to 0.005")
(W 7.0" X D 5.3" X H 5.7")
1.8 kg (3.96 lbs) (with printer)
300 thousand times
buttons on the operator panel.
Guillotine cutter
Cutter malfunction detection
Width: 25 to 115 mm (1.0" to 4.5")
Pitch: 25 to 100 mm (1.0" to 3.9")
0.08 to 0.21 mm (0.003" to 0.008")
(W 7.0" X D 4.8" X H 5.7")
1.6 kg (3.5 lbs)
Unit: 150 km, Nip roller: 30 km
Section 6: Basic Specifications
Page 6-7