Default Mode - SATO CW408 Operator's Manual

Preliminary
Section 3: Operation and Configuration

3.13 DEFAULT MODE

The printer can be reset to the default setting as in the factory preset.
1. When the printer is in OFFLINE mode, press and hold the LINE and FEED buttons simultaneously for
more than three seconds. The printer switches to SETTING MENU mode. Then press the LINE button
repeatedly to display DEFAULT MODE on the screen. Press the FEED button to enter to Default mode.
2. When DEFAULT MODE menu is displayed, press the LINE button to select an item and then press the
FEED button to save the setting and proceed to the next screen.
Menu
DEFAULT MODE
DEFAULT MODE
DEFAULT MODE
FACTORY SETTING
DEFAULT MODE
DEFAULT MODE
PRINTER SETTING
DEFAULT MODE
DEFAULT MODE
I/F SETTINGS
DEFAULT MODE
CONTROL CODE
FACTORY SETTING
DEFAULT SETTING?
YES NO
Page 3-26
SETTING MENU
DEFAULT MODE
SKIP SELECT
LINE + FEED button
DEFAULT MODE
DEFAULT MODE
DEFAULT MODE
FACTORY SETTING
DEFAULT MODE
DEFAULT MODE
PRINTER SETTING
DEFAULT MODE
DEFAULT MODE
I/F SETTINGS
DEFAULT MODE
CONTROL CODE
LINE + FEED button
FACTORY SETTING
DEFAULT SETTING?
YES NO
Press LINE to select
"YES" + FEED button
FACTORY SETTING
COMPLETED
PLEASE POWER OFF
DEFAULT MODE
Select the item to be initialized.
FACTORY SETTING: Initialize the settings to factory default.
PRINTER SETTING: Initialize the basic setting to default.
I/F SETTINGS: Initialize the interface settings to default.
CONTROL CODE: Initialize the communication protocol code to default.
The initial setting is FACTORY SETTING.
DEFAULT SETTING confirmation menu.
Default mode item that was selected in previous display appears in the first row
of the screen.
Selecting YES and pressing the FEED button will initialize the printer setting.
The initial setting is NO.
If NO, it returns to DEFAULT MODE without initializing the printer setting.
FEED button
FEED button
The selected default
mode item will
appear in the first
row of the screen.
After 3 beeps sound,
the printer will prompt
to power off.
Description
CW408 Operator Manual