Paper End - SATO Cl4NX Operator's Manual

4 Operation and Configuration

Paper End

Printing > Advanced > Paper End
Set the media type for sensing paper end.
The options are as follows:
• Using I-mark: Use I-mark sensor (reflective type) to sense paper end.
• Using Gap: Use Gap sensor (transmissive type) to sense paper end.
Head Base Position
Printing > Advanced > Head Base Position
Set the position used for the base reference point for printing.
The options are as follows:
• Standard: Print with a standard base reference point.
• Left-justify: Move the base reference point 2 mm (0.08") to the left side
(when you face the printer).
Priority Setting
Printing > Advanced > Priority Setting
For printer configuration, set whether to prioritize the setting through the
printer or prioritize the setting through the command.
The options are as follows:
• Enabled: Prioritize the setting through the printer.
• Disabled: Prioritize the setting through the command.
84
CL4NX Operator Manual