SATO CW408 Operator's Manual page 71

Preliminary
3.17 DOWNLOAD MODE (Cont'd)
Preparation:
When downloading from the host computer through the connected interface, make sure that the interface is
connected and selected in the INTERFACE MODE.
1. In MAINTENANCE MODE, press the LINE button to select DOWNLOAD MODE and then press the FEED
button.
2. DOWNLOAD READY is displayed on the screen. Send the data for downloading from the host computer.
3. The printer displays the download status on the screen as shown in the above flowchart. The screen
changes depending on the data download from the host computer.
Menu
DOWNLOAD MODE
DOWNLOAD READY
DOWNLOAD MODE
FONT DOWNLOAD
READY
DOWNLOAD MODE
DELETING. . .
DOWNLOAD MODE
RECEIVING. . .
DOWNLOAD MODE
WRITING. . .
CW408 Operator Manual
DOWNLOAD MODE
Waiting to receive download data.
The printer waits to receive the data from the interface selected in the interface
mode.
The following data will be received from the PC and written to the main ROM.
(1) Firmware data
(2) Font/ logo data
(3) Truetype font
When Firmware data is received, it goes to RECEIVING screen.
When font, logo and Truetype fonts are received, it goes to FONT
DOWNLOAD READY screen.
Waiting to receive font data.
When downloading the font for the first time, it goes to RECEIVING... screen.
To overwrite or delete font data, it goes to DELETING... screen.
Deleting font data.
The progress bar shown on the lower portion of screen indicates deleting sta-
tus of download data.
To overwrite font data after deleting the font data, it goes to RECEIVING...
screen.
To delete the font data, it goes to FONT DELETE COMPLETED screen.
Receiving download data.
The progress bar shown on the lower portion of screen indicates the data
reception status.
After receiving the download data, it goes to WRITING... screen.
Writing download data.
The progress bar shown on the lower portion of screen indicates writing status
of download data.
After writing the download data, it goes to FONT REGISTRY COMPLETED
screen when downloading font and logo. Or, it goes to VERIFYING... screen
when downloading firmware.
Section 3: Operation and Configuration
Description
Page 3-45