SATO CW408 Operator's Manual page 49

Preliminary
3.11 ADVANCE SETTINGS MODE (Cont'd)
Menu
ADVANCE SETTINGS
CONTROL CODE
ADVANCE SETTINGS
STANDARD
CONTROL CODE
ALT. PROTOCOL
ADVANCE SETTINGS
PRIORITY SETTING
ADVANCE SETTINGS
COMMAND
PRIORITY SETTING
INTERNAL
ADVANCE SETTINGS
LANGUAGE
ADVANCE SETTINGS
ENGLISH
LANGUAGE
CHINESE
CW408 Operator Manual
ADVANCED MODE
To set the control code.
The ESC sequence in SBPL commands can be defined as standard (using
non-printable code 1BH) or alternative protocol (some other user code).
STANDARD [Control code of Sato standard]
STX: <02H>
ESC: <1BH>
CAN: <18H>
ALT.PROTOCOL [Control code of alternative protocol]
STX: <7BH>
ESC: <5EH>
CAN: <21H>
To set the control code of alternative protocol, send the user download com-
mand <LD> in normal mode. For more details on the <LD> command, refer to
the Command Specifications.
The initial setting is STANDARD.
This screen appears when selecting priority setting.
PRIORITY SETTING specifies which one is prioritized between SBPL data or
the internal setting of the printer for following system setting command.
PRINT DARKNESS <#F>, PRINT SPEED <CS>, PRINT OFFSET<A3>,
OPERATION MODE <PM>, PRINT METHOD<PH>, SENSOR TYPE<IG>
COMMAND: Prioritizes SBPL data from the host.
INTERNAL: Prioritizes the internal setting of the printer.
The initial setting is COMMAND.
To set the display language.
ENGLISH or CHINESE can be selected.
The initial setting is either ENGLISH or CHINESE, depending on the region in
which it was purchased.
Note:
The language options shown on the display depends on the font downloaded
into the printer memory.
Section 3: Operation and Configuration
Description
ETX: <03H>
ENQ: <05H>
NULL: <7EH>
ETX: <7DH>
ENQ: <40H>
NULL: <00H>
Page 3-23