SATO CW408 Operator's Manual page 95

Preliminary
VERSATILE FUNCTIONS
SELF-DIAGNOSIS FUNCTION
PROTECTION FUNCTION
HARDWARE AND RELATED
Operation Buttons
Indicators
Buzzer
CW408 Operator Manual
1) Status return function
2) Graphics function (Printing graphic)
3) Sequential number function (Sequential number)
4) Form overlay function (Cleared at power off)
5) External font registration function (Cleared at power off)
6) Character correction function (Smoothing)
7) Black/white inversion function
8) Ruled line function
9) Zero slash switching function (Support XU, XS, XM, XB, XL, outline font)
10) Dump list function (HEX dump mode)
11) Outline font function
12) Outline modification function
13) Tag/Label auto-feed function (support no-disposal of the first and the last label)
1) Broken head element check
2) Cover open detection
3) Paper end detection
4) Test print
5) Kanji data check
6) Cutter error (Only when cutter unit is installed)
1) Print head overheating protection: Pausing print
Pause print when print head reaches a certain level of temperature.
2) Peak current protection: Separate printing process
Perform separate printing when print ratio in horizontal direction exceeds 50%.
3) Overload protection: Pausing print
Pause print after end of print depends on the print ratio of print data.
4) Average current protection: Print speed limitation
Limit print speed when print ratio in horizontal direction exceeds 70%.
5) Chassis overheating protection: Pausing print
Pause print when printer chassis reaches a certain level of temperature.
Power
1) button
2) LINE button
3) FEED button
OLED: Yellow/ blue
ONLINE: Green LED
ERROR: Red LED
Built-in buzzer with sound ON/OFF function
Section 6: Basic Specifications
Page 6-5