Sp2-Xxx (Drum) - Ricoh G092 Service Manual

SP2-XXX (Drum)

Mode No.
2
(Class 1, 2, and 3)
201 [Dev. Bias] Development Bias ([Color], Process Speed)
#
1 [K] Over All
2 [C] Over All
3 [M] Over All
4 [Y] Over All
5 [K] 100
6 [C] 100
7 [M] 100
8 [Y] 100
9 [K] 124
10 [K] 50 600dpi
11 [C] 50 600dpi
12 [M] 50 600dpi
13 [Y] 50 600dpi
14 [K] 50 1200dpi
15 [C] 50 1200dpi
16 [M] 50 1200dpi
17 [Y] 50 1200dpi
18 OHP [K] 50
19 OHP [C] 50
20 OHP [M] 50
21 OHP [Y] 50
208 [Toner Control]
# 1 Set Flag
310 [Transfer Bias] Transfer Bias
# ( Paper Type, Process Speed, Tray)
Paper Type → N: Normal, Thin, OHP, Card, Envelope, Coated Paper, Label, PostCard
Tray → B: By-pass Tray Postcard DFU (used in Japan only)
1 N 100
2 N 124
3 N 50
4 Thin 100
5 Thin 124
6 Thin 50
7 OHP B
8 Card B
9 Envelop 1 B
10 Coated Paper B
11 Label B
12 PostCard Doc
(Postcard Document)
13 PostCard Adr
(Postcard address)
30 Other 1 100
31 Other 1 124
32 Other 1 50
SM
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
Adjusts the development bias.
[ 0 ~ 20 / 10 / 1 V/step ] DFU
Sets the toner control flag. The flag having been set, the
toner is supplied to the development unit when the main
power switch is turned off and on, or the machine
recovers from the energy saver mode.
After the toner has been supplied to the development
unit, the toner control flag is reset (the flag is turned off).
Adjusts the transfer roller bias for paper type and each
print mode.
[ 0 ~ 30 / 15 / 63.16 V/step ]
5-13 G081/G092