Ricoh G092 Service Manual page 73

[A]: Drive unit bracket ( x 4)
[B]: CMY change gears
[C]: BK change gear
[D]: Hopper change gear
[E]: Hopper gears (A)
[F]: Hopper gears (B)
[G]: Hopper gear (C)
[H]: Coupling gear
[I]: Outer gear
[J]: Planetary gears
[K]: Planetary gear bracket
[L]: Inner gear
Lubricating
Lubricate the following parts (Grease 501) when replacing them (values in
parentheses indicate the amount of lubricant):
• The inner cogs (0.1 cc x 2) and outer cogs (0.1 cc x 2) on the CMY change gears
[B]
• The shafts of the CMY change gears [B] (0.05 cc)
• The inner cogs (0.1 cc) and outer cogs (0.1 cc) on the BK change gear [C]
• The shaft of the BK change gear [C] (0.05 cc)
• The shaft of the hopper change gear [D] (0.05 cc)
• The shafts of the hopper gears (A) [E] (0.05 cc x 2)
• The shafts of the hopper gears (B) [F] (0.05 cc x 2)
• The shaft of the hopper gear (C) [G] (0.05 cc)
• The inner cogs on the left side of the coupling gear [H] (0.1 cc)
• The cogs on the outer gear [I] (0.1 cc)
• The shaft of the outer gear [I] (0.05 cc)
• The shafts of the planetary gears [J] (0.05 cc x 2)
• The inside (0.1 cc) and outside (0.1 cc) of the right end and the inside (0.1 cc) of
the left end of the inner gear [L]
SM
ECB AND DRIVE UNITS
[A]
[B]
[L]
3-15
G081R922.WMF
[E]
[F]
[G]
[D]
[C]
[K]
[I]
[J]
[H]
G081R919.WMF
G081/G092