IEEE802.11B (WIRELESS LAN)
6.8.5 TROUBLESHOOTING NOTES
Communication Status
Wireless LAN communication status can be checked with the UP mode "W.LAN
Signal" in the Maintenance menu. This can also be checked using the Web Status
Monitor or Telnet.
The status is described on a simple number scale.
STATUS DISPLAY
Good
Fair
Poor
Unavailable
NOTE: Communication status can be measured only when the infrastructure mode
is being used.
Channel Settings
If a communication error occurs because of electrical noise such as interference
with other electrical devices, etc., you may have to change the channel settings.
To avoid interference with neighboring channels, a separation of 3 channels is
recommended. For example, if there are problems using channel 11 (default), try
using channel 8.
Channel
1
MHz
2,412
G081/G092
COMMUNICATION STATUS
76~100
41~75
21~40
0~20
25 MHz
2
3
4
5
2,437
25 MHz
6
7
8
9
6-64
10
11
12
13
2,462
G081D949.WMF
SM