Laser Scanning Unit; Paper Feed; Paper Exit - Ricoh G092 Service Manual

3.6.2 LASER SCANNING UNIT

• Rear cover (! 3.4.4)
• Left cover (! 3.4.5)
• Top cover (! 3.4.4)
[A]: Laser scanning unit grounding plate
( x 4)
NOTE: When reassembling, arrange the
wires correctly. The laser
scanning unit wires (shielded
cable) go under the plate; the
other wires go over the plate. Be
sure to re-install using the exact
same screws as removed.
[B]: Laser scanning unit ( x 3,  x 3)
NOTE: 1) To avoid dust, do not disassemble the laser scanning unit.
2) When reassembling, adjust the position of the CMY PCU (! 3.12).

3.7 PAPER FEED

3.7.1 PAPER EXIT

• All covers (! 3.4)
• Paper pickup motor bracket (! 3.5.5)
[A]: Inner cover ( x 2,  x 2)
[B]: Duplex unit detection sensor
[C]: Duplex unit jam detection sensor
board
SM 3-19
PAPER FEED
[A]
[B]
G081R923.WMF
[A]
[C]
[B]
G081R924.WMF
G081/G092