Power Requirements; Machine Installation; Installing The Photoconductor Unit - Ricoh G092 Service Manual

1.1.4 POWER REQUIREMENTS


CAUTION
1. Make sure the plug is firmly inserted in the outlet.
2. Avoid multi-wiring.
3. Be sure to ground the machine.
1. Input voltage level: 120 V, 60 Hz: More than 10 A
2. Permissible voltage fluctuation: ±10 %
3. Do not set anything on the power cord.

1.2 MACHINE INSTALLATION

1.2.1 INSTALLING THE PHOTOCONDUCTOR UNIT & WASTE
TONER BOTTLE
1. Open the right cover [A] of the printer.
NOTE: The machine should NOT be
plugged into the power outlet
during installation.
2. Pull out the green levers on the left
and right that are fastening the inner
cover [B].
SM
220 V to 240 V, 50 Hz/60 Hz: More than 6 A
[B]
1-3
MACHINE INSTALLATION
G081I291.WMF
G081I301.WMF
G081/G092
[A]