Ricoh G092 Service Manual page 205

7. NVRAM : 8 KB NVRAM for storing the printer parameters and logged data
8. IEEE1284 Interface : Supports compatible, nibble, and ECP modes
9. Network Interface : 100BASE-TX/10BASE-T
10. NVRAM board (option) : 64 KB NVRAM used for storing a record of the
number of pages printed under each "User Code".
11. USB Interface : See the USB Interface section.
12. IEEE1394 Interface (option) : See the IEEE1394 Interface section.
13. IEEE 802.11b Interface (option): See the IEEE 802.11b Interface section.
14. Bluetooth Interface (option): See the Bluetooth Interface section.
15. HDD (option) : A 3.5" HDD (20.5 GB) can be connected using the IDE interface.
The hard disk is partitioned as shown below. The partition sizes cannot be
adjusted.
Partition
File System 1
Image TMP
Job Log
The system and application software for the following boards can be downloaded
from the Controller PCMCIA memory card.
• Controller (Flash ROM and flash ROM DIMM)
• Engine
For details on downloading software from an PCMCIA memory card, see Service
Tables – Firmware Update Procedure.
SM
Size Function
Downloaded fonts,
500 MB
forms.
Collation, sample print,
9800 MB locked print.
Job log.
10 MB
6-43
CONTROLLER
Comment
Remain stored even after
cycling power off/on.
Commonly used area for
applications, erased after
power off.
Remains stored even after
cycling power off/on.
G081/G092