Energy Saver Mode - Ricoh G092 Service Manual

CONTROLLER FUNCTIONS

Energy saver mode

Activate the user mode to set energy saver modes 1 and 2. You can set On/Off for
energy saver mode 1. This is the Preheat mode. The default is "on". When the
printer switches to energy saver mode, the power indicator turns off, while the "on
line" indicator stays on. With energy saver 2, you can set how many minutes the
printer waits before switching to energy saver mode (5, 15, 30, 45, 60). In energy
saver 2, the default is "on" (60 minutes).
Temperature
Printing
Energy saver
mode off
Energy saver
mode 1
Energy saver
mode 2
End of
print job
G081/G092
Start of Start of
heating printing
15.5 sec. 25.0 sec.
5, 15, 30, 45, or 60 min.
Start of Start of
heating printing
Start of energy
saver mode 2
6-52
Start of
heating
28.0 sec.
G081D929.WMF
Start of
printing
Time
SM