Ricoh G092 Service Manual page 70

ECB AND DRIVE UNITS
[A]: Drive unit bracket ( x 8)
[B]: Grounding plate ( x 1).
[A]
[B]
G081R918.WMF
[C]: Feed idle gear
[J]
[D]: Cam gear
[E]: Left PC idle gears
[F]
[F]: Right PC idle gear
[G]: Left transfer-unit idle gears
[H]: Right transfer-unit idle gear
[I]: Joint gear
[I]
[G]
[H]
[G]
[E]
G081R914.WMF
[C] [D]
Lubricating
Lubricate the following parts (Grease 501) when replacing them (values in
parentheses indicate the amount of lubricant):
• The shaft of the feed idle gear [C] (0.05 cc)
• The shaft of the cam gear [D] (0.05 cc)
• The shafts of the left PC idle gears [E] (0.05 cc x 4)
• The shaft of the right PC idle gear [F] (0.05 cc)
• The shafts of the left transfer-unit idle gears [G] (0.05 cc x 2)
• The shaft of the right transfer-unit idle gear [H] (0.05 cc)
• The inside of the PC bushing [J] (0.1 cc)
G081/G092 3-12 SM