Ricoh G092 Service Manual page 147

Mode No.
7
(Class 1, 2, and 3)
808 [Counter Clear]
1 Counter Clear
816 [Tray Clear]
1 Tray 1
2 Tray 2
3 Tray 3
825 [Counter Reset]
1 Counter Reset
832* [Diag. Result ] Diagnosis Result
1 Diag. Result
833 [Covrage] Pixel Coverage Ratio
#
1 Last: BK
2 Last: C
3 Last: M
4 Last: Y
5 Average: BK
6 Average: C
7 Average: M
8 Average: Y
836 [Total Memory]
1 Total Memory
901 [Assert Info] Assert Information
1 File Name
2 # of Lines (Number of
lines)
3 Location
905 [Alert Display]
#
51 PC(K) Page
52 PC(YMC) Page
53 TC(K) starter
54 TC(K) option
55 TC(CMY) starter
56 TC(CMY) option
57 Fusing Page
60 Trans Page
910 [Firmware PN] Firmware Part Number display
1 Controller
18 NIB
131 Bluetooth
150 RPCS
151 PS
152 RPDL
153 R98
154 R16
156 R55
158 PCL
159 PCLXL
SM
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
Clears all counters except for SP7-003 and –007.
[0 ~ 1 / 0 / 0 /step]
Clears the tray counters (SP7-204).
[0 ~ 1 / 0 / 0 /step]
Resets the total counter values to "0."
[0 ~ 0 / 0 / 0 /step]
Displays the result of the diagnostics. Refer to section
4.2 for the error codes.
Displays the pixel coverage ratio for each color of the last
output.
[ 0 ~ 100.00 / - / 0.01 %/step ]
Displays accumulated average value of pixel coverage
ratio for each color.
[ 0 ~ 100.00 / - / 0.01 %/step ]
Displays the capacity of memory on the main controller
board.
Records the location where the last problem (SC990)
was detected in the program. The data stored in this SP
is used for problem analysis.
[0 ~ 0 / 0 / 0 /step]
Displays the threshold of the number of pages for the
alert display for each maintenance unit.
Displays the part number.
5-23 G081/G092