Ricoh G092 Service Manual page 146

PRINTER ENGINE SERVICE MODE
Mode No.
7
(Class 1, 2, and 3)
504* 23 Exit : OFF2
24 PaperSizeErr (Paper
Size Error)
25 Tray 2 : ON
26 Tray 3 : ON
27 Duplex : ON
506* [Jam Paper Size]
5 A4
14 B5
36 8 " x 14" (LG)
1/2
38 8 " x 11" (LT)
1/2
44 5 " x 8
1/2
128 Others
803 [PM Counter]
# Displays the number of pages printed for each current maintenance unit.
1 Page Total
2 Page Mono
3 PC(K) Page
4 PC(YMC) Page
5 Toner(K) Pixel
6 Toner(C) Pixel
7 Toner(M) Pixel
8 Toner(Y) Pixel
9 Fusing Page
12 Trans Page
804 [PM Counter Clear]
(Unit [Color])
1 PC [K]
2 PC [YMC]
15 Fusing
17 Accumulator
30 Toner:BK
31 Toner:C
32 Toner:M
33 Toner:Y
805 [TonerBotolInfo] Toner Bottle Information
17 TonerRest:BK
18 TonerRest:C
19 TonerRest:M
20 TonerRest:Y
807 [SC/Jam Clear]
1 SC/Jam Clear
G081/G092
Paper does not pass the exit sensor.
The registration sensor recognized that paper was too
short.
Paper does not reach the gate sensor of tray 2.
Paper does not reach the gate sensor of tray 3.
Paper does not reach the duplex unit sensor.
Displays the number of jams according to paper size.
[0 ~ 9999 / 0 / 1 /step]
" (HLT)
1/2
Display the actual total number of pages printed.
[ 0 ~ 99999999 / 0 / 1 page ]
Display the actual total number of monochrome pages
printed.
[ 0 ~ 99999999 / 0 / 1 page ]
Display the number of pages that is calculated from
drum rotation.
[ 0 ~ 99999999 / 0 / 1 page ]
[ 0 ~ 9999999999 / 0 / 1/1024 pixel ]
[ 0 ~ 99999999 / 0 / 1 page ]
Display the number of pages that is calculated from the
transfer belt rotation.
[ 0 ~ 99999999 / 0 / 1 page ]
Clears the PM counter.
Press the Enter key after the machine asks "Execute?".
When a unit is replaced, the machine automatically
detects that the new unit is installed. Then, the current
PM counter value is automatically reset to "0".
Clears the PM counter.
Displays how much toner remains in the bottle.
[0 ~ 1 / 100 / 1 %]
Clears the counters related to SC codes and paper jams.
[0 ~ 1 / 0 / 0 /step]
Function / [ Setting ]
5-22 SM