Ricoh G092 Service Manual page 33

6. While holding the photoconductor unit
from the bottom cover in your left
hand, match the green arrow at the tip
of the photoconductor unit [A] to the
rail inside the printer.
NOTE: Make sure the green arrow fits
securely on the rail before
proceeding to the next step.
Do not touch the surface of
the OPC drum(s) with your
hands.
7. Slide the front of the photoconductor
carefully in. Slide the unit on the cover,
and then push the unit in until it stops.
NOTE: If you do not properly attach
the green arrow of the
photoconductor unit securely
to the rail, you may damage
the photoconductor unit.
8. Repeat steps 4 through 7 to install the color photoconductor unit.
9. Lower the inner cover [B] slowly,
applying even pressure.
SM
MACHINE INSTALLATION
[A]
[B]
1-5
G081I370.WMF
G081I390.WMF
G081I410.WMF
G081/G092