Input Check Table - Ricoh G092 Service Manual

5.3.2 INPUT CHECK TABLE

When entering the Input Check mode, 8 digits display the result for a section. Each
digit corresponds to a different device as shown in the table. Refer to 5.1 Service
Program Mode for access information.
Bit No. 7
Result 0 or 1
SP5-803
Bit
-XXX
[Tray 1 Paper] Paper End Sensor (Tray 1)
1
0 Paper End Sensor
[Regist] Registration Sensor
2
0 Registration Sensor
[Paper Tray 1] Cassette Sensor (Tray 1)
0 Tray set
3
1 Paper Size Switch 1
2 Paper Size Switch 2
[By-pass Paper] By-pass Paper Sensor
4
0 By-pass Paper Sensor
[By-pass Home] By-pass Home Position Sensor
5
0 By-pass Home Position Sensor
[Tray 2 Paper] Paper End Sensor (Tray 2)
6
Paper End Sensor
[Tray 2 Jam] Jam Sensor (Tray 2)
7
0 Jam Sensor
[Paper Tray 2] Cassette Sensor (Tray 2)
0 Tray set
8
1 Paper Size Switch 1
2 Paper Size Switch 2
[Tray 3 Paper] Paper End Sensor (Tray 3)
9
Paper End Sensor
[Tray 3 Jam] Jam Sensor (Tray 3)
10
0 Jam Sensor
[Paper Tray 3] Cassette Sensor (Tray 3)
0 Tray set
11
1 Paper Size Switch 1
2 Paper Size Switch 2
[P Exit Full] Exit Paper Full Sensor
12
0 Exit Paper Full Sensor
[Paper Exit] Exit Sensor
13
0 Exit Sensor
[Dpx Jam] Duplex Jam Sensor
14
0 Duplex Jam Sensor
[Dpx Unit] Duplex Unit Sensor
15
0 Duplex Unit Sensor
[Fusing JAM] Fusing Exit Sensor
16
0 Fusing Exit Sensor
17 [Fusing Roller] Fusing Roller Rotation Sensor
0 Fusing Roller Rotation Sensor
SM
6 5 4
0 or 1 0 or 1 0 or 1
Description
5-25
PRINTER ENGINE SERVICE MODE
3 2
0 or 1 0 or 1 0 or 1
Reading
0
Paper detected
Paper detected
Not set
See Table 1.
1: Pushed
Paper detected
Not home position Home position
Paper detected
Paper detected
Not set
See Table 1.
1: Pushed
Paper detected
Paper detected
Not set
See Table 1.
1: Pushed
Not full
Paper detected
Paper detected
No unit Duplex unit detected
Paper detected
Not rotating
1 0
0 or 1
1
Paper end
No paper
Set
No paper
Paper end
No paper
Set
Paper end
No paper
Set
Paper full
No paper
No paper
No paper
Rotating
G081/G092