Ricoh G092 Service Manual page 142

PRINTER ENGINE SERVICE MODE
Mode No.
5
(Class 1, 2, and 3)
840 7 Channel Min
11 WEP key number
844 [USB] USB settings
1 Transfer Rate
2 Vendor ID
3 Product ID
4 Dev Release Num
851
[Bluetooth]
1 Mode
907*
[Plug/Play] Plug and Play
1 Plug/Play
917 [Printable Area]
#
1 Extended
920 [Pre Heat Mode]
#
1 Pre Heat Mode
G081/G092
Function / [ Setting ]
Sets the minimum value for the wireless LAN channel
adjustment. DFU
[1 ~ 11 or 13 / 1 / 1 /step]
Europe/Asia: 1 to 13
USA: 1 to 11
Note: Do not change the setting, or the machine may be
out of compliance with local regulations.
Selects the WEP key.
[0 ~ 3 / 0 / 1 /step]
Adjusts the USB transfer rate.
HS/FS: High speed/Full speed auto adjust
(480Mbps/12Mbps)
FS Fixation: Full speed (12Mbps fixed)
Do not change the setting unless there is a data transfer
error using the USB high speed mode.
Displays the vendor ID. DFU
Displays the product ID. DFU
Displays the development release version number. DFU
Select the Bluetooth mode.
0: Public Mode
1: Private Mode
[ 0 or 1 / 0 / - ]
Specifies the Plug and Play setting.
[0 ~ 6 / 0 / 1 /step]
• 0: RICOH
• 1: SAVIN
• 2: GESTETNER
• 3: NRG
• 4: LANIER
Enlarges the width of the printable area.
The sides of images are sometimes not printed even if
"Wide-A4" is selected with PCL. Set this SP mode to 1 to
enlarge the printable area, but the quality of the image
will be slightly poorer.
[ 0 or 1 / 0 / – ]
0: Off, 1: On
This feature warms the fusing belt when in standby
mode to reduce the first page print time.
[0 or 1 / 0 / – ]
0: On, 1: Off
5-18 SM