Ricoh G092 Service Manual page 156

FIRMWARE UPDATE PROCEDURE
9. Check that "Updating" is displayed, and that
asterisks replace underscores one by one.
10. Wait until "Upgraded Power Off On" is
displayed.
11. Turn the main switch off.
12. Remove the PCMCIA memory card and insert the PCMCIA card that contains
"Onboard System 2/2."
13. Repeat steps 6 through 11. When the main
switch is turned on (step 6), "Onboard Sys.
2/2" is displayed (step 7).
14. Remove the PCMCIA memory card and insert the PCMCIA card that contains
"Network Support."
15. Repeat steps 6 through 11. When the main
switch is turned on (step 6), "Network Support"
is displayed (step 7).
16. Remove the PCMCIA memory card.
17. Attach the cover [A].
18. Close the front door.
G081/G092
Updating...
!!!
Updated
Power Off On
Onboard Sys. 2/2
Network Support
5-32
-------------
G081S528.WMF
G081S529.WMF
G081S530.WMF
G081S531.WMF
SM