Ricoh G092 Service Manual page 78

PAPER FEED
[A]: Paper exit gear cover
( x 3,  x 1)
NOTE: The connector is at CN26
on the engine board
(! 3.5.1).
[B]: Gears
[C]: Switching lever
NOTE: When reinstalling the gears on the
paper exit gear cover, reassemble
them as shown in the illustration.
[A]: Paper exit roller joint gear
[B]: Double gear
[C]: Switching lever spring
[D]: Rotation switching solenoid
[E]: Intermediate gear
[F]: Outer gear x 2
[G]: Inner gear x 4
[H]: Coupling gear x 2
CAUTION: The rotation switching gear [I]
differs from the other gear [J] in
the direction of the gear teeth
(see Figure-1).
Lubricating
Lubricate the following parts (Grease 501)
when replacing them (values in parentheses indicate the amount of lubricant):
• The shafts on the outer gears [F] (0.05 cc x 6); the cogs on the outer gears [F]
(0.1 cc x 2)
• The cogs on the coupling gears [H] (0.1 cc x 2)
• The shafts on the paper exit gear cover [K] (0.05 cc x 3)
G081/G092
[B]
[A]
[K]
[B]
[C]
[D]
3-20
[C]
G081R930.WMF
[A]
See figure-1
[E]
[F]
[G]
[H]
Figure-1
[I]
[J]
G081R931.WMF
SM