Ricoh G092 Service Manual page 72

ECB AND DRIVE UNITS
[A]: CMY home lever
[B]: PC home spring
[C]: PC home lever
[D]: PC home position sensor
( x 1)
[E]: Four PCU gears
( x 4)
[F]: Four development gear
assemblies
[G]: Four bushings
[H]: Fusing unit idle gear
( x 1)
Lubricating
Lubricate the following parts (Grease 501) when replacing them (values in
parentheses indicate the amount of lubricant):
• The shaft of the CMY home lever [A] (0.05 cc)
• The shafts of the PCU gears [E] (0.05 cc)
• The inside of the bushing [G] (0.1 cc x 4)
• The interface with the bushing [G] of the development gear [I] (0.05 cc x 4)
• The shaft of the fusing unit idle gear [H] (0.05 cc)
• The skirt of the left end of the development coupling [J] (0.05 cc x 4)
• The inside of the PC bushing [K] (0.1 cc x 1)
G081/G092
G081R916.WMF
[H]
3-14
[C]
[B]
[D]
[A]
[G]
[F]
[E]
[J]
[I]
G081R921.WMF
SM