Vlan Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.5.2

VLAN Menu Command

Assignment and Management of the VLAN IDs
The Current VLAN Configuration dialog displays a table with an overview of the
configured VLAN IDs (VID).The assignment of the configured ports of the access
point is also displayed as a member of these VLANs.
The Name is used to identify an entry within the current table. Member Lis
'U' for untagged member of a VLANs or '–' if a port is not member of a V
sequence is sorted from left to right in ascending order; in other words, according
to the ID of the interface (WLAN 1, WLAN 1 VAP 1, WLAN 2 VAP 2... or WLAN 1
WDS 1, WLAN 1 WDS 2...).
Entries in red, indicate members in the table, entries in black indicate the
configured port VLAN IDs.
If an interface is member of a VLAN ID, th
frames arriving from Ethernet with this VLAN ID are accepted. Outgoing frames,
however, always have the port VLAN ID.
Click on VID or Name to open the configuration page for VLAN IDs. With New, yo
create a new VLAN ID, with Refresh, you can update the table.
Note
The Ethernet interface does not remov
If the VLAN is active, the WLAN interfac
outgoing frames.
Member List
U
U
—
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
at is not the same as the port VID,
e VLAN tags from outgoing frames.
es always remove all VLAN tags from the
Meaning
If VID equals port VID; in other words untagged frames
from WLAN are given this VID.
If the port is a member of the VID; in other words, tagged
frames from Ethe rnet are forwarded on this port.
If the port is not a member of the VID; in other words, all
the frames coming from Ethernet are blocked / discarded
with the corresponding VLAN ID. Frames containing
unconfigured VIDs and untagged frames are always
blocked if the VLAN is active.
t displays
LAN. The
u
183