Siemens SCALANCE W788-1PRO Operating Instructions Manual page 113

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line
CLI\SYSTE M\IP>
Command
dhcp [E|D]
dhcptype [M|N|C]
clientid
ip [IP addre ss]
subnet [subnet mask]
gateway [IP address]
ttl [TTL value]
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Interface
Description
Enable / disable DHCP server.
Specifies how a device will be
identified:
M MAC address
N Device name
C Client ID
Specifies a client-ID for the device.
Specifies the IP address for the
SCALANCE W78x.
Specifies the subnet mask.
Specifies the IP address of the
router.
Sets the TTL (Time To Live)
parameter.
Comment
When you enter a valid IP
address, enabled DHC P
is automatically disabled.
Default value: 64
113