Siemens SCALANCE W788-1PRO Operating Instructions Manual page 54

4. Make the following entries if you have decided to assign the IP address
manually:
● Enter the IP address for the device in the IP Address box. In each pa
the address separated by the periods, you can enter
and 255; the program does not accept any other num
● Enter the subnet mask in the
● If necessary, select the Use router check box and enter the IP address of
the router in the text box. Router information is necessary if the computer
on which you are creating the configuration is not in the same subnet as
the device to be configured.
Downloading Configuration Data to the Module
Follow the steps below to transfe
1. Select the module you want to configure in the left pane of the program
window. As long as an interface is selected and the input dialog for the
configuration data is displayed, no download of the configuration
possible.
2. Start the download by following the steps outlined below:
● Select the Module > Download menu command.
● Click on the second button
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Configuring the IP Address with the Primary Setup Tool
Subnet Mask box.
r the configuration data to the device:
from the left in the toolbar.
rt of
a number betwe en 0
bers.
data is
54