Storm Threshold Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.5.6 Storm Threshold Menu Comman
Note
Storm Threshold is available in access point and in the client mode. The function
can only be used in client mode if NAT is disabled.
Limitation of Broadcast and Multicast Frames
Storm Threshold is the maximum number of broadcast or multicast frames per
second forwarded by the SCALANCE W78x. If this lim
SCALANCE W78x stops processing such frames for 30 seconds.
Syntax of the Command Line Interface
CLI\BRIDG E\STORM
Command
stormthr <E|D>
broadcast <limit value>
multicast <limit value>
broad_eth <limit value>
multi_eth <limit value>
broad_1 <limit value>
broad_2 <limit value>
multi_1 <limit value>
multi_2 <limit value>
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
THR>
Enables / disa
threshold function.
Specifies the maximum num
broadcast packets per second from
the same address.
Specifies the maximum number
multicast packets per second from
the same address.
Specifies the
broadcast packets per second for
the Ethernet interface.
Specifies the maximum number of
multicast packets per se
Ethernet interface.
Specifies the maximum number of
broadcast packets per second for
the first or second wireless interface.
Specifies the maximum number of
multicast packets per second for the
first or second wireless interface.
d
it is exceeded, the
Description
bles the storm
ber of
maximum number of
cond for the
Comment
202