Siemens SCALANCE W788-1PRO Operating Instructions Manual page 48

DLC Protocol
The Primary Setup Tool uses the DLC protocol for communication with the
module s. Depending on the operating system you are using, you must work
throug h the following steps before you can use the DLC protocol:
● Windows XP Professional
The DLC protocol is not supplied with Windows XP and must be installed and
activated separately.
● Windows 2000 Professional SP2
The DLC protocol is supplied with Windows 2000 but must be added to the
active protocols.
Note
The sections on installing the DLC protocol are relevant only for older firmware
vers ions < V2.3.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Configuring the IP Address with the Primary Setup Tool
48