Siemens SCALANCE W788-1PRO Operating Instructions Manual page 191

Configuration Using Web Based Management and the Command Line Interface
S yntax of the Command Line Interface
CLI\BRIDG EVLAN\VLAN_ID>
Command
info
add <VLAN-ID> [u [Ports]]
edit <VLAN-ID>
[- [Ports],]
[u [Ports],]
delete <VLAN-ID>
C LI\BRIDGE\VLAN\P
Command
info
vlan <Port> <E|D>
portvid <Port> <VLAN-ID>
portprio <Port> <Priority>
member <Port> <all|specific>
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Shows the currently configured VLANs and their
relationship to the ports.
Inse
Ports:
u:
Examples:
add 100 u 2 4
Creates an entry wi
are members of this VLAN.
Changes the membership
parameters correspond to those of the add command.
Examples:
edit 100 - 2
Port 2 no loner belongs to
Deletes the VLAN with the specified VLAN ID from the
configuration of the SCALANC W78x.
ORTS>
Displays an overview of the po
VLAN settings.
Enables / disables VLAN for th
Received frames without a V
port are given a V
The priority assigned to untagge
802.1d.
The specified port is a memb
VLAN configured in VLAN
De scription
rts a new VLAN.
Specifies the ports
configured for the VLAN.
The port is a member of the VLAN.
Frames are sent without VLAN
th the VLAN ID 100. Ports 2 and 4
of ports in a VLAN. The
the V
Description
LAN tag at the specified
LAN tag with the <VLAN-ID>.
er of all VLANs or only the
ID (specific, see above).
tag.
LAN with ID 100.
E
r ts and corresponding
e specified port.
d frames a ccording to
191