Siemens SCALANCE W788-1PRO Operating Instructions Manual page 190

Configuration Using Web Based Management and the Command Line Interface
Port VLAN ID (o nly in access point mode of a W788xRR)
Here, you enter the VLAN ID (VID) of the VLAN on which the virtual access point
will co mmunicate.
The individ
SCAL ANCE X400). The VID of a VLAN is in the range from 1 to 4094.
VLAN membership (only in access point mode of a
Here, you specify the VLANs for which the virtual access point will be a member or
which other VLANs the
The following alternatives in the assignment are possible:
● all
Th e VAP is member of all VLANs.
● on ly
The VAP is me
Here, enter the
m ember.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
ual VLANs are configured in the VLAN-compliant switches (for example
port VLAN ID (VID) entered above will be assigned to.
mber only of the VLANs entered below.
VLAN ID (VID) of up to 8 VLANs in which the VAP will be a
W788xRR)
190