Siemens SCALANCE W788-1PRO Operating Instructions Manual page 126

Configuration Using Web Based Management and the Command Line Interface
CLI\SYSTE M\SNMP\USER>
Command
add <user n ame> <group name>
[NONE|MD 5|SHA]
[authentica tion ID]
[Encryption ID ]
edit <index >
<group n ame>
[NONE|M D5|SHA]
[authentica tion ID]
[Encryption ID]
delete <Index>
clearall
CLI\SYSTEM\SNMP\TRAP>
Command
traps [E|D]
settrap <entry>
<IP address>
<E|D>
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
De scription
Assigns an SNMPv3 user to a
group.
If authentication is necessary for the
group, the algorithm must be
specified as a parameter (MD5 or
SHA).
If encryption is necessary for the
group, the encryption password
must be specified as a parameter.
Changes the group assignment, the
authentication algorithm, and the
encryption password of the SNMPv3
user.
Deletes an SNMPv3 user from the
list at the point identified by the
index.
Deletes all SNMPv3 users.
Description
Enables / disables SNMP traps.
Specifies the IP addre ss of the trap
recipient entry (entry between 1 and
10) and enables / disables the
sending of traps to this recipient.
Comment
The auth entication
password an d the
encryption password ca n
be a maximum of 63
characters long.
Comment
Traps are then enabled, if
SNMP v1, v2c is also
enabled.
126