Siemens SCALANCE W788-1PRO Operating Instructions Manual page 120

Configuration Using Web Based Management and the Command Line Interface
Command
setec MS <E|D> <E|D>
<E|D> <E|D>
setec CT <E|D> <E |D>
<E|D> <E| D>
setec IS <E|D > <E|D>
<E|D> <E|D>
setec LI <E|D> <E|D>
<E|D> <E|D>
setec IQ <E|D> <E|D>
<E|D> <E|D>
setec CA <E|D> <E|D>
<E|D>
setec RD <E|D> <E |D>
<E|D> <E|D>
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description
Reaction when the update time in
iPCF mode with PNIO support
cannot be k ept to due to a
additional client.
Reaction when the specified update
time in iPCF mode with PNIO
support cannot be kept to.
Reaction to a change in the
connection status on a client for
which the IP-alive monitoring is
activated.
Reaction when establishing a
connection monitored with the Link
Check function.
Reaction to a change in the iQoS
status.
Reaction to a change in the client
authentication status.
Reaction to a change in the
redundancy event status.
Comment
This command is
available only on the
n SCALA NCE W788-
and SCALANCE W788-
2RR models but not
client mode.
This command is
available only on t
SCALANCE W788-1RR
and SCALANCE W788-
2RR models but not in
client mode.
If the connection status
c hanges, an event is
triggered. If the
connection no longer
exists, the error state is
triggered and the error
L ED is lit.
T his command is not
available in the client
mode.
T his command is not
available in the client
mode.
This command is not
availabl e in the clien
mode.
This command is not
available in the client
mode.
T his command is not
available in the client
mode.
1RR
in
he
t
120