Configuring Uplink Vlan For An Ap - Siemens SCALANCE W1750D UI Configuration Manual

Customizing AP Settings

8.5 Configuring Uplink VLAN for an AP

8.5 Configuring Uplink VLAN for an AP
SCALANCE W supports a management VLAN for the uplink traffic on an AP. You can
configure an uplink VLAN when an AP needs to be managed from a non-native VLAN. After
an AP is provisioned with the uplink management VLAN, all management traffic sent from
the AP is tagged with the management VLAN.
Note
Ensure that the native VLAN of the AP and uplink are not the same.
You can configure the uplink management VLAN on an AP by using the SCALANCE W UI or
the CLI,
In the SCALANCE W UI
To configure uplink management VLAN:
1. On the Access Points tab, click the AP to modify.
2. Click the edit link.
3. Click the Uplink tab.
4. Specify the VLAN in the Uplink Management VLAN text box
5. Click OK.
6. Reboot the AP.
In the CLI
To configure an uplink VLAN:
(scalance)# uplink-vlan <VLAN-ID>
To view the uplink VLAN status:
(scalance)# show uplink-vlan Uplink Vlan Current :0
Uplink Vlan Provisioned :1
94
Configuration Manual, 02/2018, C79000-G8976-C451-02
SCALANCE W1750D UI