Siemens SCALANCE W788-1PRO Operating Instructions Manual page 237

Configuration Using Web Based Management and the Command Line Interface
S yntax of the Command Line Interface
CLI\INFORM\WLAN1>
or for the second wireless adapter (if it exists)
CLI \INFORM\WLAN2>
Command
overlap
over_age [1. .7200]
VLAN
T his page displays informa
information on each virtual access po
● Port Name
The configured port name. Here, y u
points (VAP), the WDS connectio
VLAN if applicable.
● VLAN
The status of the relevant VLAN (
● VLAN ID
The configured VLAN ID
● SS ID
The SSID of the relevant VLAN
● Member
Shows the virt
all = VAP is memb
only = VAP i
● Priority
The config
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description
Shows the access points on the set
or adjacent channels.
Changes the aging interval (in
minutes) for th e list of neig
access poi nts. I
longer tha n the
removed from the list.
tion on the configured virtual LANs with the following
ual access point (VAP) as member of other VLANs:
er of all VLANs
s member of only certain VLANs
ured frame prioritization
hborin g
f an AP is inactiv e for
time set here, it is
int (VAP):
o see a list of the configured virtual access
ns nd the management and the redu a
E = enabled, D = disabled)
Comment
ndancy
237