Siemens SCALANCE W788-1PRO Operating Instructions Manual page 155

Configuration Using Web Based Management and the Command Line Interface
Command
swretry [E|D]
swretno [0 ... 15]
hwretno [0 ... 15]
preamb [E| D]
antenna [A|B|SA|SB|D]
noise [A|L|M|H]
wmm [E|D]
antgain [0...30
anttype [0. ..n]
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description
Enables / disables the software retry
functionality.
Specifies the number of software
retries.
Specifies the number of hardware
retries.
Enables / disables the short
preamble.
Specifies which antennas are used:
A Only antenna A
B Only antenna B
SA Antenna A transmits
Anten na B receives
SB Antenna B transmits
Antenna A receives
D The best of both antennas
(diversity)
Set the noise fil ter
A Automatic
L Low
M Medium
H High
Enables / disables frame
transmission taking into account
priority.
Set antenna gain in dBi
Set antenna type:
Comment
When this function is
enabled, higher data rates
according to IEEE
802.11b are supported
(higher performance).
With the IWLAN/PB Link
with one antenna socket,
the default (Antenna A)
must not be changed.
A strong noise filter allows
a more stable connection
but also a shorter
transmission range.
To see the list, enter
"anttype ?".
155