Siemens SCALANCE W788-1PRO Operating Instructions Manual page 153

Configuration Using Web Based Management and the Command Line Interface
Roaming when there is no Ethernet Inte
If the wired Ethernet interface is n
removed), a client connected ove
SCALANC
deactivating its WLAN
SCALANCE W78x. You
down on Ethernet inter
E nable WMM (only in acc
With Wireless Multimed
standard are transmitte
priority).
Select the Enable WMM
priority and sent prioriti
According to the Wi-Fi s
Access Category
WMM voice priority
WMM Video priority
WMM best effort
priority
WMM background
priority
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
E W78x can then force
interface. The client then attempt
enable this feature by selecting t
face check box.
ess p oint mode)
ia, multimedia frames complying w
d at a higher priority (see Section
option if you want frame
zed over the WLAN interface.
tandard, prioritized frames are cl
Description
Highest priority
Allows multiple concurrent VoIP cal
latency and toll voice quality
Prioritize video traffic above other da
One 802.11g or 802.11a channel ca
SDTV streams or 1 HDTV streams.
Traffic from legacy devices, or traffic
applications or devices that lack Qo
Traffic less sensitive to latency, but affected by
long delays, such as Internet surfing.
Low priority traffic (file downloads, print jobs) that
does not have strict latency and throughput
requirements.
rface (only in access point mode)
o longer available (cable break, connector
r the wireless network is not aware of this. The
the logged o n WLAN clients to
s evaluat
roam by
s t log on at a different o
he Force roaming if link
ith the IEEE 8 02.11e
6 .3.2, WLAN > User
ed according to their
assified as follows:
802.1d
Tags
7, 6
ls, with low
ta traffic. 5, 4
n support 3-4
from 0, 3
S capabilities.
2, 1
153