Siemens SCALANCE W788-1PRO Operating Instructions Manual page 103

Configuration Using Web Based Management and the Command Line Interface
S ymbols fo r Rep resenting CLI Commands
CLI commands generally have one or more parameters that a
syntax description as follows:
● Mandatory parame
Example:
● Optional parameters are shown in square brackets.
Example:
If you omit an optional parameter, the commands output the currently set
value.
● Alt ernative input va
specify one of the listed values as the p
Example:
You must enter either E or D.
● If a numeric value is required as a
a range of values:
Example
You must enter a value betwe
Cross-menu Commands
You can use the commands in the following table in any menu.
CLI\ ... >
Command
/
?
exit
restart
info
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
ters are shown in pointed brackets.
<IP address>
[E|D]
lues are separated b
[E|D]
: <0 ... 255>
en 0 and 255.
Moves you one menu level higher.
Displays the commands and submenus
available in the menu.
Ex its the CLI/Telnet or SSH session.
Restarts the SCALANCE W78x
Displays information on the current
menu item.
y the pipe character. In this
arameter.
mandatory par ameter, you can also specify
Description
re represented in the
case, you
Comment
Cannot be called
using the command
shortcuts.
Cannot be called
using the command
shortcuts.
103