Siemens SCALANCE W788-1PRO Operating Instructions Manual page 125

Configuration Using Web Based Management and the Command Line Interface
CLI\SYSTEM\SNMP\GROUP>
Command
add <Name>
[NOAUTH|AUTH|PRIV]
[R|W]
edit <Index >
[NOAUTH|AUTH|PRIV]
[RE|RD| WE|WD]
delete <Ind ex>
clearall
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
De scription
Adds an SNMPv3 group. NOAUTH –
No authentication, no encryption;
AUT H - Authentication with MD5 or
SHA algorithm, no encryption.
PRIV - Authentication with MD5 or
SHA algorithm and encryption with
the DES3 algorithm.
R – Read access;
W - Write access
Changes the securit y level of the
group and sets the access rig
You can view of the index of the
group with the "info" command.
RE – allows read access;
RD – denies read access;
WE – allo ws write access;
WD – deni es write access;
Deletes the SNMPv3 g roup from the
group list at the index pos
Clears all SNMP groups th
empty.
Comment
Write access without read
access is not possible.
You cannot edit the
hts. authentication and
encryption settings unless
the group is empty.
Preventing read access
also prevents write
access.
Permitting write access
also permits read access.
Is only possible to delete
ition. a group if it is empty.
at are
125