Mac Dir Filter Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.6.2 MAC Dir Filter Menu Comman
Restriction of the Data Traffic between MAC
It is possible to filter the
SCALANCE W78x acc
address ac
source addresses or en
destination address is t
not entered in the filter,
S yntax of the Comm
CLI\FILTERS\MAC2FLT>
Comma nd
fltmac2 <E|D>
add <SourceMAC> <DestMAC>
edit <Index> [E|D]
[SourceMAC]
[DestMAC]
delete <Index>
clearall
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
data traffic intended for wirel
ess point. This filter is
cess only to other specified MAC addresses. You can specify seve
tries for one destination address.
hen restricted to these entries
it is not subjected to any restr
and Line I nterface
Enables / disable
Adds a new entry with source and
destination address to the filter.
Changes the entry specified by
Index. With [E|D], you can enable /
disable the entry.
Deletes the entry at the specified
index position.
Deletes all entries for the MAC
filter.
d
Addresses
ess clients linked to the
used to permit a specified MAC
The communication of the
. If a destination address is
ictions.
Description
s the MAC filter.
ral
Comment
211