Siemens SCALANCE W788-1PRO Operating Instructions Manual page 117

Configuration Using Web Based Management and the Command Line Interface
Restore Fa tory Defaults and Restart button c
Click o n this button to
defaults (see above) are als
exists. An automatic restart
Note
By resetting all the defaults, the IP address is also lost. T
then only be accessed using
obtained over DHCP.
If you are logged on as user, the Restore Factory Defaults button is not visible.
Syntax of the Command Line Interface
CLI\SYSTE M\RESTARTS>
Command
restart
memreset
defaults
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
restore the factory configurat
o reset. The C-PLUG
is triggered.
the Primary Setup Tool un ess the IP address is
Description
Restarts the SCALANCE W78x.
Resets the factory settings and
triggers a restart (the protected
settings are not deleted).
Resets the factory settings (the
protected settings are also deleted).
ion settings. T he protected
is reinitialized and formatted if it
he SCALANCE W78x can
l
Comment
The restart command can
be called from all menus
however not using the
shortcut commands.
,
117