Configuration Using Web Based Management and the Command Line Interface
6.3.4
SS
ID List Submenu (client
Not
e
The SSID List menu is available only when you use the SCALANCE W78x in Client
mode. You can specify the mode in the System menu.
Network Attachment of the Client
Wit
h this men command, you can specify how the SCALANCE W78x connects to
netw
ork as client:
●
If the Connect to ANY SSID check box is selected, the SCALANCE W78x in
client mode attempts to connect to the network with the best transmission
quality and with suitable security settings. If the Suppress SSID broadcasting
setting is made for an access point, the SCALANCE W78x cannot log on there
with the
●
If this check box is not selected, the SCALANCE W78x attempts to connect to
the network from the SSID list that has the best transmission quality.
An
SSID is absolutely necessary in ad hoc networks and iPCF. The maximum
numbe
r of SSIDs in the SSID list is restri
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
mode only)
ANY
SSID.
cted to 32.
a
156