Vap Submenu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.3.7 VA P Submenu Com
D escription
You can only
have configured virtual access points at the higher level Interfaces > WLAN (Virtual
AP count > 0).
On this page, you can a
words, the access poin
S SID
Enter the SSID of the V
Make s ure that you als
client th at you assign to
Note
You can configure sepa
Sec tion 6.4.1, WBM me
The security settings of the VAPs must meet those of the relevant VLANs.
Synta x of the Command Line Interface
CLI\INTER FACES\WLAN1>VAP1>
or for the second wireless adapter (if it exists)
CLI\INTERFACES\WLAN2>VAP1>
Command
vap [E|D]
ssid [network name]
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
mand
complete the pages of the virtual acce
ssign a separate SSID to th
t operates in multiple SSID mode.
LAN here.
o store the SSID of this VLAN
this VLAN.
rate securi ty settings for each virtual access point (see
nu Security > Basic WLAN > WLA 1/2
Description
Enable /disable virtual access point
Assigns a network name (SSID).
ss poin ts VAP1...VAP7 if you
e virtual access points; in other
in the configuration of th
N > VAP1...7).
Comment
e
162