Wlan Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.3.2 W LAN Menu Command
Enabling t he Interface
Enabling interface by selecting Enable Interface.
Network n ame (on ly in access point mode)
E nter the network name of the wireless network in the SSID text box. If you have
used t he Basic Wizard, a value is already entered here.
Infrastruct ure / Ad Hoc (only in client mode)
Select Infrastructure to connect to an access point. Ad hoc is used to connect
clients with each other without an access point. This is only possible when ad hoc
is set on all clients.
Transmiss ion Mode
Spe cify the transmission mode in the Wireless Mode list box. If you have used the
Bas ic Wizard, a value is already entered here.
Not e
IEEE 802.11h transmission (only in Access Point mode):
It is not possible to select the 802.11h protocol in all country settings. It is specified
by the configuration of Country code on the System page.
If the 802.11h protocol is selected, after applying the configuration with Set Values,
the comm
Interface check box.
With the automatically enabled Dynamic Frequency Selection function (DFS), p
to communication, the access point checks whether configured or selected channel
(see Auto Channel Select) is free o
ra dar).
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
ent (DFS i s active for this country code appears behind the Enable
f signals from a primary user (for example
rior
143