4.3
Installation of the DLC Protocol in Windows 2000
Professional SP2
Follow the steps below to install the DLC protocol on your computer:
1.
Select the menu command Start > S
Dial-Up Connections.
2.
Select the connection to your Ethernet communications module.
3.
Right-click to open the context menu and select Prop
4.
Click on the Install... button in the General tab.
5.
In the Select Network Component Type dialog, select the entry Protocol an
click the Add... button.
6.
In the Network Protocols window, select the entry DLC Protocol and con
by clicking OK.
7.
Close the properties dialog by clicking the OK button.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Configuring the IP Address with the Primary Setup Tool
ettings > Control Panel >Network and
erties.
d
firm
50