Gp 5.5 Drive Power Transmission To The Mbf Feed Roll Assembly (Or Cst) (1 Of 2); Gp 5.6 Drive Power Transmission To The Feed Roll Assembly (Or Cst) (2 Of 2) - Xerox DocuPrint N2025 Service Manual

GP 5.5 Drive Power Transmission to the MBF Feed Roll
Assembly (or CST) (1 of 2)
The drive power generated by the Motor: Main is transmitted to the MBF Feed Roll Assembly
(or ENV) of the P/H Assembly through the Gear Assembly: Main and the Gear MBF IN Figure
1.
Each time the MBF Feed Solenoid (or CST) is actuated, the MBF Pick Up Gear (or CST) is
pulled into engagement by the Spring Pick Up (or the Spring), and rotates one turn. Then, it
disengages from the Gear MBF IN. Driven by this MBF Pick Up Gear (or CST) rotation, the
MBF Feed Roll Assembly (or ENV) rotates one turn and feeds one sheet of paper from the
MBF (or the Cassette Assembly) into the printer.
Figure 1 Drive to MBF Feed Roll Assembly
Initial Issue
DocuPrint N2025/N2825
GP 5.6 Drive Power Transmission to the Feed Roll
Assembly (or CST) (2 of 2)
See the figure below Figure 1.
Figure 1 Drive to Feed Roll Assembly
02/2000
6-59
General Procedures / Information
GP 5.5, GP 5.6